Product Introduction

high quality hydraulic filter

Product Description

 

 

Part#	BEP-319-19 BEP-319-39
filter type	Hydraulic Filter
Filter material	Glass Fiber Filter
Business Type	Factory/Manufacturer
	(1) It has good air permeability and stable performance. (2) Large folding filter, more folding filter paper. (3) The filter element has large area and long service life. (4) High air flow and low resistance make the engine more powerful

Filter material characteristics

• Micro glass

a. Deep filtration

b. Complete filtration

c. High particle retention capacity

d. Achieves optimal micron level under high pressure drop

e. Suitable for mineral oil, emulsions, and most synthetic hydraulic oils and lubricants

• Paper

a. Deep filtration

b. Nominal filtration

c. Made of paper and polyester fibers

d. High material stability and strength

•  Stainless steel wire mesh

a. Surface filtration

b. Nominal filtration

c. Provides high resistance filtration elements (for any type of hydraulic oil)

d. Can be partially cleaned

e. Can offer 25 microns, 40 microns, and 80 microns, and other micron specifications can be provided upon request

• Microglass

a. Deep filtration

b. high Filtration

c. High particle holding capacity

d. micron rating at high Δp

e. Usable for mineral oils, emulsions, and for most synthetic hydraulic fluids and lubrication oils

• Paper

a. Deep Filtration

b. Nominal Filtration

c. Constructed of paper and polyester fiber

d. High material stability and strength

• Stainless steel wire mesh

a. Surface Filtration

b. Nominal Filtration

c. Provides high resistance filter elements (irrespective of the hydraulic fluid used)

d. Partially cleanable

e. Available in 25 μm, 40 μm, and 80 μm, other micron ratings on request

 

 

Selling products

Product information

Performance of hydraulic filter:

Efficiency - F9. Minimum 99.9% (HEPA).

Hydrophobic (water proof),  moisture proof,  Antiflaming.

Salt Repellent – must remove 99.5% of all salt crystals from turbine inlet air.

Wet Burst Pressure – greater than 7500 Pa (30” wc).

Initial Pressure Drop – 180 Pa @ 2500 m3/h (.72” wc @ 1472 cfm).

Temperature Range -   -40°C to +65°C (-40°F to +149°F).

Humidity Range – 0 to 100% relative humidity.

Flame Retardance – E d 2 according to EN 13501.

Must result in no (0%) Combustion Turbine Mega Watt power loss in 8000 hours of operation.

Must fit into air inlet systems without modification.

Manufacturing tolerances and joint details shall be such that no gaps or air/water leaks occur in the assembly after installation and during operation.

The performance of the filters is to match (or better) the below charts.

Operation Mode
1	Pulse cleanable and static.
2	Must last longer than one year of continuous service (8000 hours).
3	Operational environment – Marine, coastal, tropical and semi-tropical environments.

 

Please click to learn more

Main Products

Please click on the picture for more products

Company Information

Our Services

Warranty :

Defects in material and workmanship for 2 years from time of installation.

Will last one (1) year of continuous service (8000 hours).

Filter must result in no power loss due to compressor fouling or filter dP increase over 8000 hours of operation.

Packaging & Shipping

FAQ

1.Are you a trading company or manufacturer?

We are professional manufacturer with factory in China, since 1988.

2.What kinds of filter do you produce?

It covers widely for air filter,oil filter,fuel filter for trucks, construction machinery, power plant equipment,compressor-turbine unit etc.

3.Is Customized filter available?

Yes,please offer your required specifications and drawing

4.Can I get you products with our logo and design?

Yes, you can. Most of our products can be customized according to your requirements.

5.How can we get the quotation of filter cartridges ?

Please let us know the specifications, such as the materials, length, macron, apply in which industry etc.

6.Do you Accept OEM service?

YES!

7. Would it be possible for us to visit you factory?

Sure we are very welcome you at any time!   

8.What's your delivery terms?

(1)FOB (2)CFR (3)CIF

9.What's your Delivery Time?

1)generally the samples will be sent immediately by the air express in 3-5 days if the goods are in stock

2)Normally within 15 to 30 days,please confirm with us before order!

10.What's the Payment Terms?

Usually,30% as deposit,70% before shipment by T/T

Western Union acceptable for small amount.

L/C acceptable for large amount.

Escrow, Paybal, Alipay Credit card are also available 

11.How to solve the quality problem?

If the products are not comfort to customer sample or have quality problems, our company will be responsible to make a composition for it.

12.How you pack products?

Normally, poly bag inside and carton outside .We'll do according to customers' requirement.

13.What's your available port of Shipment?

Normally, Shanghai and Tianjin

Other ports available but you should afford extra charges.